YIG Filters Feature 500-MHz Bandwidths

Oct. 15, 2009
The latest line of wideband filters from Omniyig provide minimum 3-dB bandwidths of 500 MHz at frequencies from 6 to 18 GHz. Based on yittrium-iron-garnet resonators, these tunable bandpass filters offer 24-dB/octave rejection slopes and passband ...

The latest line of wideband filters from Omniyig provide minimum 3-dB bandwidths of 500 MHz at frequencies from 6 to 18 GHz. Based on yittrium-iron-garnet resonators, these tunable bandpass filters offer 24-dB/octave rejection slopes and passband insertion loss of only 6.5 dB. The YIG filters are available with integrated analog or 12-b digital drivers. For more information on the firm's YIG-based filters and oscillators, visit the company's web site.

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...