Rugged Antennas Tackle RFID Systems

May 31, 2007
M/A-COM (Tyco Electronics) has launched a line of ruggedized RFID antennas for use in baler and compactor applications. The MAAN-000210-AT0000 antennas provide typical gain of 2.5 dB with a 3-dB beamwidth of 130 deg. and typical VSWR of 1.50:1. The RFID ...

M/A-COM (Tyco Electronics) has launched a line of ruggedized RFID antennas for use in baler and compactor applications. The MAAN-000210-AT0000 antennas provide typical gain of 2.5 dB with a 3-dB beamwidth of 130 deg. and typical VSWR of 1.50:1. The RFID antennas feature multidirectional conduit access holes and a removable connector access panel for more efficient installation. The connector housing is removable for use in National Electrical Manufacturer's Assocation (NEMA) enclosures. For more information on the RFID antennas, visit the Tyco Electronics' M/A-COM website at: http://www.macom.com/

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...