EPX Microwave Adds Push-Button Pads

June 30, 2007
EPX Microwave has announced the ESA series of push-button attenuators for manual control of attenuation in measurement and other high-frequency systems. The components can be specified in frequency ranges of DC to 1 GHz and from DC to 2.5 GHz, with as ...

EPX Microwave has announced the ESA series of push-button attenuators for manual control of attenuation in measurement and other high-frequency systems. The components can be specified in frequency ranges of DC to 1 GHz and from DC to 2.5 GHz, with as much as 70-dB attenuation in 1-dB steps and from 0 to 10 dB attenuation in steps as fine as 0.1 dB. The attenudators are designed for average power levels from 2 to 10 W and can be ordered with a variety of connector options, including Type N, BNC, SMA, TNC, and EIA 7/16 connectors. For more information, visit the EPX Microwave website at: www.epxmicrowave.com

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...