Mwrf 1283 Crystek 0
Mwrf 1283 Crystek 0
Mwrf 1283 Crystek 0
Mwrf 1283 Crystek 0
Mwrf 1283 Crystek 0

CRO Generates 2950-MHz Signals

April 28, 2014
A surface-mount CRO provides stable output signals at 2950 MHz.

Designed for a stable output frequency of 2950 MHz, model CVCO55CC-2950-2950 is a voltage-controlled coaxial-resonator oscillator (CRO) that provides at least +5 dBm output power and typically +7 dBm output power at that frequency. It offers tuning sensitivity of 7 MHz/V across a tuning range of 0.5 to 4.5 VDC for use in such applications as phase-locked-loop (PLL) synthesizers. The phase noise offset 10 kHz from the carrier is typically -115 dBc/Hz while the phase noise offset 100 kHz from the carrier drops to -135 dBc/Hz. Harmonics are typically -15 dBc. The 50-Ω CRO, which typically draws 30 mA from a +8-VDC supply, features an operating temperature range of -40 to +85°C. It is supplied in a surface-mount-device (SMD) package measuring 0.5 × 0.5 in. (12.7 × 12.7 mm).

Crystek Corp., 12730 Commonwealth Dr., Fort Meyers, FL 33913; (239) 561-3311, (800) 237-3061, FAX: (239) 561-1025

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...