Ceramic Amplifier Furnishes Flat Gain

Oct. 23, 2012
cThis ceramic-packaged MMIC-on-LTCC amplifier offers flat gain from 10 MHz to 6 GHz.

Model CMA-62+ is a ceramic-packaged, hermetically sealed, nitrogen-filled monolithic amplifier from Mini-Circuits with flat gain from 10 MHz to 6 GHz. It consists of a monolithic-microwave-integrated-circuit (MMIC) chip bonded to a low-temperature-cofired-ceramic (LTCC) substrate. It delivers gain of 15.2 dB at 2 GHz, 15.4 dB at 4 GHz, and 13.7 dB at 6 GHz, with gain flatness of ±0.6 dB from 50 to 3000 MHz and ±10 dB from 700 to 2700 MHz. The output power at 1-dB compression is typically +19.2 dBm at 2 GHz and +15.4 dBm at 4 GHz, while the output third-order-intercept point (IP3) is typically +33.4 dBm at 2 GHz and +27.3 dBm at 4 GHz. For more, click here.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...