Whitepaper: FM Receiver - Extreme Dynamic Range Test Case

June 24, 2009
One of the most challenging test conditions for RF receiver validation is the adjacent and/or alternate channel test case with a large difference in level between the main signal and the alternate, interfering channel.Due to the difficulty in ...

One of the most challenging test conditions for RF receiver validation is the adjacent and/or alternate channel test case with a large difference in level between the main signal and the alternate, interfering channel.Due to the difficulty in replicating the actual in-field signals of interest, Averna has created a new testing technique to accurately emulate this difficult signal condition or impairment.

Fill out this brief registration form to download the whitepaper:

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...