Finwave Semiconductor
Linearity
Linearity
Linearity
Linearity
Linearity

Finwave’s 3D GaN FinFET Technology Stands Poised to Break the mmWave PA Bottleneck

June 15, 2022
The company’s groundbreaking work in GaN FinFETs could open the door to high-power, high-linearity mmWave 5G power amplifiers.

This article is part of our IMS2022 coverage.

The inroads being made by gallium nitride (GaN) technology into the 5G world are good news for everyone concerned. However, an important aspect to making mmWave 5G available and accessible to all is the development of high-power, high-linearity mmWave power amplifiers. Started in 2012 by MIT researchers as Cambridge Electronics, the company now known as Finwave Semiconductor has taken up the challenge of increasing the efficiency of mmWave power amplifiers.

Today’s approaches to such amplifiers are throttling 5G due to their inability to deliver the higher linearity and efficiency needed to solve uplink issues facing mmWave frequencies, which do not propagate nearly as far as microwave signals. Seeing an opportunity to catalyze change, Finwave is now emerging from stealth mode to unveil its next-generation 3D gallium-nitride (GaN) technology.

With 10 times higher breakdown electric field than silicon, high electron mobility, and the ability to operate at higher junction temperature, GaN semiconductors are poised to play a significant role for the next decade's technology revolutions. At mmWave frequencies, GaN-on-silicon amplifiers excel versus alternative solutions such as Si CMOS, GaAs pHEMTs, or SiGe devices.

Finwave co-founders Prof. Tomas Palacios and Dr. Bin Lu first teamed at MIT to invent several of the foundational technologies for Finwave, including a novel type of GaN transistor based on a FinFET architecture. After being spun out of MIT, the company spent several years developing the technology further for manufacturing in the standard silicon CMOS fabs. By 2020, Finwave demonstrated the first GaN FinFETs fabricated with 8” silicon CMOS tools.

Finwave’s 3DGaN technology is said to significantly improve linearity, output power, and efficiency in 5G mmWave systems while reducing costs for carriers. By leveraging high volume 8” Si CMOS, Finwave’s devices benefit from both the cost model and scalability of silicon technology. “The combination of the outstanding electrostatic control and linearity of the GaN FinFET structure, with the cost model of silicon, and the scaling ability of state-of-the-art 8” and, in the future, 12” fabs makes 3DGaN a true game changer,” commented Palacios.

Finwave will be at the International Microwave Symposium in Denver for meetings with partners, industry experts, and other interested parties. Please contact [email protected] to schedule an informational briefing.

For more information, visit the company website.

For more IMS2022 coverage, visit our digital magazine.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...