Mwrf 4505 Imecpromo
Mwrf 4505 Imecpromo
Mwrf 4505 Imecpromo
Mwrf 4505 Imecpromo
Mwrf 4505 Imecpromo

GaN-on-Silicon is Ready for Space

March 14, 2017
GaN-on-silicon device technology has been tested as ready for space-based DC-to-DC power conversion applications.

Gallium-nitride (GaN) transistors are well known for their roles in RF/microwave amplification, but the active devices are also essential building blocks for high-speed power conversion and power supplies. Recent testing of GaN-on-silicon (GaN-on-Si) enhancement-mode devices by Imec, in collaboration with Thales Alenia Space Belgium, has revealed that these devices are well suited for space applications, where high doses of radiation can degrade device performance. Testing showed consistent performance before and after irradiation with heavy ions and neutrons, as typically found in space applications such as satellites.

The measurements offer strong evidence of the suitability of the GaN-on-Si devices for space-based power conversion applications. Testing was conducted on Imec’s 200-mm GaN-on-Si process devices, which showed good radiation hardness and no permanent degradation in transistor characteristics following irradiation. Because the GaN devices are fabricated on silicon substrates, they are compatible with CMOS devices fabricated on silicon for simplified integration of power-conversion and computing circuitry. Measurements followed the framework of the European Space Agency (ESA) project ESA AO/1-7688/13/NL/RA, “GaN devices for space-based DC-DC power conversion applications.”

Automated wafer probes are measuring the electrical performance of DC power devices on GaN substrates. (Courtesy of Imec)

“These results are important to start using this promising technology for space applications,” noted Rudi Cartuyvels, executive vice president at Imec. “Also, it demonstrates that our 200-mm GaN-on-Si platform has reached a high level of technology readiness and can be adopted by industry.

“Thanks to innovations in transistor architecture and substrate technology, we’ve succeeded in making GaN devices on larger wafer diameters than used today, which brings lower cost perspectives for the second generation of GaN-on-Si power devices,” he added. “Imec is also looking beyond today’s technology, exploring novel substrates, higher level of integrations, and novel devices.”

Sponsored Recommendations

Microelectromechanical 3D Printing Resources

March 28, 2024
Check out our curated list of microelectromechanical 3D printing resources and see how PµSL technology offers freedom and speed.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Making the Case for Micro-Precision 3D Printing

March 28, 2024
Read this white paper to learn how micro-precision 3D printing can provide the flexibility of additive manufacturing at a micro scale.

125 GHz Frequency Doubler using a Waveguide Cavity Produced by Stereolithography

March 28, 2024
Read this technical paper to learn how a 125 GHz frequency doubler using a waveguide cavity was produced by stereolithography.