Mwrf 12055 Xray Promo
Mwrf 12055 Xray Promo
Mwrf 12055 Xray Promo
Mwrf 12055 Xray Promo
Mwrf 12055 Xray Promo

UV LED Stimulates Calibrated, Fully Controllable X-Ray Source

Dec. 9, 2019
An innovative technique for creating fully controllable X-rays uses an ultraviolet LED’s output to stimulate emissions from a target material.

Applications such as science and space spectroscopy need a known source for self-calibration before measuring the energy of incident X-rays, and most in-flight X-ray detectors use a radioactive source for this due to its stability. However, besides the obvious associated with a radioactive source, it requires shielding so that its constant output doesn’t appear as background noise, which masks the desired signal.

Other approaches also have their weaknesses. The hot cathode-based advanced MXS systems can generally only vary its output intensity relatively slowly—on the order of seconds—due to the thermal time constant of the filament X-ray source (Fig. 1).

1. Conventional X-ray sources use a heated filament with on/off transition times of several seconds. (Source: NASA)

Another option, the laser-based femtosecond source, can’t produce X-ray flux having arbitrary, continuously variable output intensity because its driving laser has minimum pulse-recovery and recycling time. Finally, architectures using high-efficiency photocathodes have excessive “dark current” (electron emission despite lack of stimulating light). As a result, they’re never fully off, have high power consumption, and experience early cathode burnout, among negatives.

Consequently, there’s a need for an X-ray source (MXS) that can be fully and easily modulated, producing X-rays only at predetermined intervals and at a controllable rate. Now, a NASA team has devised a miniaturized X-ray source that’s “stimulated” by a UV LED and can be modulated in intensity from completely off to full intensity at sub-nanosecond rates—and with output over 100 keV (Fig. 2).

2. The UV LED-driven MXS uses photoelectrons to vary X-ray output at nanosecond rates and timing. (Source: NASA)

Its high-speed and miniature size not only meet the calibration needs of test-and-measurement setups, but also make it a good fit for new technologies including X-ray-based communication, compact time-resolved X-ray diffraction, X-ray fluorescence instruments, non-destructive testing (NDT), and precise low-dose medical X-rays,

This MXS produces electrons by directing UV light from a LED onto a photocathode material such as magnesium. The electrons are then accelerated across several kV and into a chosen target material; the sudden deceleration produces X-rays at a wavelength that’s characteristic of the target material’s properties. The MXS uses a cold-cathode electron multiplier (similar to a photomultiplier tube) for high efficiency in X-ray production.

This MXS design is more compact, rugged, and power-efficient than standard X-ray sources, and can be manufactured using commercially available components supplemented by a 3D-printed housing, lowering manufacturing costs (Fig. 3). Further, unlike traditional X-ray sources, the MXS doesn’t require a filament or vacuum and cooling systems.

3. The new miniaturized X-ray source can be modulated in intensity from fully off to full intensity, and is suitable for a wide of electronic, medical, and even space-related instrumentation systems. (Source: NASA)

Full details are available in the NASA-assigned U.S. patent US 9,117,622, “Miniaturized High-Speed Modulated X-Ray Source.”

Sponsored Recommendations

Microelectromechanical 3D Printing Resources

March 28, 2024
Check out our curated list of microelectromechanical 3D printing resources and see how PµSL technology offers freedom and speed.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Making the Case for Micro-Precision 3D Printing

March 28, 2024
Read this white paper to learn how micro-precision 3D printing can provide the flexibility of additive manufacturing at a micro scale.

125 GHz Frequency Doubler using a Waveguide Cavity Produced by Stereolithography

March 28, 2024
Read this technical paper to learn how a 125 GHz frequency doubler using a waveguide cavity was produced by stereolithography.