Mwrf 1482 Fairviewpromo 0
Mwrf 1482 Fairviewpromo 0
Mwrf 1482 Fairviewpromo 0
Mwrf 1482 Fairviewpromo 0
Mwrf 1482 Fairviewpromo 0

Tunable Filters Screen 0.1 to 3.0 GHz

July 10, 2014
Lines of mechanically tuned bandpass and band-reject filters are designed for applications to 3 GHz.

Lines of tunable band-stop and bandpass filters have been developed for test and other applications from 100 MHz to 3 GHz. A total of six bandpass filters offer octave-band tuning from 125 MHz to 3 GHz and 5% pass bands. These five-section mechanical designs achieve mechanical dial accuracy within 1%. Five new band-reject filters range from 100 MHz to 2 GHz with 1% rejection bandwidths.

These three-section designs boast mechanical dial tuner accuracy to 0.5%. These durable, silver-plated filters, which are capable of more than 50-dB attenuation, are supplied with Type-N connectors. Each is rated for 50 W CW RF/microwave power.

Fairview Microwave, Inc., 1130 Junction Dr., Ste. 100, Allen, TX 75013; (800) 715-4396, (972) 649-6678, FAX: (972) 649-6689 

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...