(Image courtesy of dBm).
(Image courtesy of dBm).
(Image courtesy of dBm).
(Image courtesy of dBm).
(Image courtesy of dBm).

Wide Bandwidth Emulator Aids Satellite Testing

Sept. 22, 2016
A line of satellite link emulators provides the means of checking the performance of a satcom system when faced with different types of signal errors and distortion.

While numerous conversations on the EDI CON 2016 exhibition floor turned to the growing needs for broadband communications, at least one exhibit revealed solutions for handling measurements with increased bandwidth.

The model SLE900 Satellite Link Emulator from dBm Corp. also follows a trend in designing test equipment in a modular fashion for feature flexibility. The signal source is geared for testing satellite-communications (satcom) system testing and can be configured with 1, 2, 3, or 4 independent channels and with center frequencies of 70 and 140 MHz with 72-MHz bandwidth, 140 MHz with 125-MHz bandwidth, and 1200 MHz with 250-MHz bandwidth, for emulating the link signal conditions of different satcom systems.

On display and demonstration at EDI CON 2016 Booth #713, the link emulator provides as many as six taps per channel. The instrument uses those wide-bandwidth signal channels to provide sitcom-like signals for testing, with link impairments that include delays, Doppler shifts, attenuation/loss, phase errors, multipath distortion, and additive white Gaussian noise (AWGN). The instrument can be used in different modes, such as static mode where the link impairments are set to fixed values, and dynamic mode where data files can be loaded from an Ethernet connection for changing conditions of link signals.

As much as 1400 ms delay can be added per channel, depending upon model, with typical noise floor of -141 dBm/Hz. Signal attenuation can be set from 0 to 70 dB with 0.1-dB resolution. The phase offset range is 0 to 180 deg., adjustable with 1-deg. resolution. The link emulators feature excellent frequency accuracy, thanks to a 10-MHz internal frequency reference. They can be remotely controlled via test software of choice of the firm’s SleControl software provided with each instrument. 

Sponsored Recommendations

Microelectromechanical 3D Printing Resources

March 28, 2024
Check out our curated list of microelectromechanical 3D printing resources and see how PµSL technology offers freedom and speed.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Making the Case for Micro-Precision 3D Printing

March 28, 2024
Read this white paper to learn how micro-precision 3D printing can provide the flexibility of additive manufacturing at a micro scale.

125 GHz Frequency Doubler using a Waveguide Cavity Produced by Stereolithography

March 28, 2024
Read this technical paper to learn how a 125 GHz frequency doubler using a waveguide cavity was produced by stereolithography.