Hermetic Seals Safeguard Mixers

June 12, 2012
Mixers capable of translating one set of signal frequencies to another with minimal loss in the process are invaluable for high frequency receivers and transmitters. Mixers such as the diode-based MAC family of RF/microwave mixers from Mini-Circuits are ...

Mixers capable of translating one set of signal frequencies to another with minimal loss in the process are invaluable for high frequency receivers and transmitters. Mixers such as the diode-based MAC family of RF/microwave mixers from Mini-Circuits are currently usable at RF and local oscillator (LO) frequencies through 12 GHz. They are supplied in hermetic ceramic packages that isolate the mixers from the ravages of the outside environment, helping to promote high reliability and long operating lifetimes. The mixers measure just 0.30 x 0.25 x 0.06 in. (7.62 x 6.35 x 1.52 mm), enabling their use in small areas within printed-circuit boards (PCBs). In spite of the ceramic circuitry and protection via hermetic sealing, these are low-cost componentspriced typically less than $8 each, depending upon the frequency range. To learn more, click here.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.