ZigBee Module Scales Data Rates From 250 kb/s To 1 Mb/s

April 16, 2009
Low-power ZigBee technoLogy can be used for applications like home and building automation, industrial control, and medical patient monitoring. whereas most ZigBee modules run at 250 kb/s, the new Meshconnect ZigBee (ieee 802.15.4) modules ...

Low-power ZigBee technoLogy can be used for applications like home and building automation, industrial control, and medical patient monitoring. whereas most ZigBee modules run at 250 kb/s, the new Meshconnect ZigBee (ieee 802.15.4) modules run at 250 kb/s, 500 kb/s, or a full 1 Mb/s. As a result, they enable higher-speed applications as well as those that require burst throughput. there are two modules based on the Zic2410: the ZicM2410p0 with +6 dBm output power and the ZicM2410p2 with +20 dBm output power. with receive sensitivity of 97 dBm and low error vector magnitude (eVM), the Meshconnect modules typically offer a range of 3000 ft. in standby mode, the modules consume less than 0.3 mA. the modules enable various applications including cable replacement and automated heating, ventilating, air conditioning, and lighting systems. the 1-x-1.25-in. modules boast an integrated voice codec and antenna or optional antenna connector. p&A: less than $15/module; 1000 qty.

California Eastern Laboratories (CEL), 4590 Patrick Henry Dr., Santa Clara, CA 95054- 1817; (408) 919-2500, FAX: (408) 988-0279, Internet: www.cel.com.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.