SiTime's MEMS timing devices are manufactured by Bosch. (Image courtesy of Bosch).

SiTime Rolls Out Oscillators for Aerospace and Defense Markets

July 23, 2019
SiTime Rolls Out Oscillators for Aerospace and Defense Markets

SiTime introduced a new range of rugged oscillators for aerospace and defense applications, as the Santa Clara, California-based company aims to expand its share of the more than $6 billion timing device market. The new parts are designed to resist vibrations, severe temperatures, pressure, airflow, electromagnetic interference and other rough-and-tumble conditions faced by airplanes, satellites and defense electronics 

SiTime sells timing solutions based on microelectromechanical systems, or MEMS, instead of the tiny crystals typically used to spit out the timing signals that form the heartbeat of every electronic device. SiTime's MEMS can better withstand harsh conditions in large part because they weigh a small fraction of crystal components. They also claim lower power and higher reliability, though they generally cost more than crystal devices.

Its latest line of oscillators, Endura, are able to hold out against acceleration forces that can undermine the accuracy of timing signals used in aerospace and defense. The chips can also better endure vibrations that can degrade performance. SiTime said its new oscillators have up to 50 times better acceleration sensitivity. The chips can also deliver up to 20 times better tolerance for mechanical shock and 3.5 times more vibration performance.

SiTime said all its Endura devices meet MIL-PRF-55310 and MIL-STD-883 standards.

"When exposed to high levels of shock, vibration and extreme temperatures, legacy timing components have been prone to failure, degrading system performance and reliability,” said Piyush Sevalia, vice president of marketing at SiTime, which is also trying to swipe market share in in cars, factories and other high-reliability systems. He believes that SiTime's Endura oscillators "will transform the oscillator landscape in aerospace and defense.”

SiTime's Endura devices are targeted at customers that need voltage-controlled oscillators (VXCOs) that put out different frequencies based on the input voltage, temperature-compensated oscillators (TCXOs) that better tolerate heat fluctuations, digitally-controlled oscillators (DCXOs) and standard oscillators (XOs), among others. The Endura family spans 17 separate products, which can be programmed into 5 million different part numbers.

The Endura oscillators are based on a programmable analog architecture, which makes it possible to program them to any frequency between 1 MHz and 725 MHz depending on the type of oscillator used. Operating voltage and stability are also open to programing. The product line can tolerate temperatures ranging from -55°C to +125°C. The chips are sampling today and are set to enter volume production in the fourth quarter of 2019.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.