Integra Technologies
This GaN-on-SiC HEMT delivers 120 W pulsed output power at 1,030 and 1,090 MHz for IFF avionics systems.

GaN-on-SiC Transistor Powers IFF Systems

Nov. 8, 2018
A GaN-on-SiC HEMT provides 120-W pulsed output power at 1,030 and 1,090 MHz for IFF avionics systems.

Solid-state power is steadily increasing at higher frequencies, enabling greater mobility and portability in electronic defense systems. As an example, Integra Technologies recently added to its portfolio of solid-state devices with its 120-W model IGN1011L120 high-electron-mobility transistor (HEMT) for L-band identify-friend-or-foe (IFF) avionics systems at 1,030 and 1,090 MHz. The gold-metalized, depletion-mode device, which is specified for use under Class AB linear biasing conditions, is supplied in a metal package with ceramic-epoxy lid measuring 1.340 × 0.385 in. (34.04 × 9.78 mm).

The rugged L-band GaN-on-SiC transistor delivers 120 W peak output power with typical power gain of 16.5 dB. Its typical drain efficiency of 75% supports the mobility and portability needed for IFF applications; it incorporates internal impedance prematching and requires a negative gate voltage and bias sequencing during normal operation. The transistor draws 160 mA quiescent drain current from a 50-V dc supply under Mode S pulsed conditions, with 6.4% duty factor (32 µs on and 18 µs off). The robust transistor is assembled via chip-and-wire technology.

To show that even more output power was possible by housing this semiconductor technology in a slightly larger package, the firm developed the model IGN1011L1200 GaN-on-SiC HEMT for 1,030-to-1,090 MHz IFF applications, with 1,200 W pulsed output power and about 17-dB gain at 1,030 and 1,090 MHz.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.