General Dynamics Mission Systems
The HOOK3 combat survival radio was recently used for a somewhat different application, in a simulated NASA search and rescue mission.

Combat Radio Helps NASA Search and Rescue

Aug. 19, 2019
A combat radio was put to work in a new role, as part of a NASA search-and-rescue mission.

Combat survival radios such as the HOOK3 from General Dynamics Mission Systems are usually not associated with search-and-rescue efforts. But the versatile combat radio was recently used in a simulated rescue mission to locate a NASA crew after an aborted space launch. The simulation involved finding the NASA crew after splashdown in the Atlantic Ocean and out of range (and out of reach) of normally available rescue resources. The weeklong test and simulation was held at Patrick Air Force Base and Cape Canaveral Air Force Station, Fla.

An Air Force C-17 aircraft served as the rescue vehicle, flying to the last known location of the downed NASA flight capsule. With General Dynamics’ HOOK3 radio technical team member Jon Wootten onboard the space capsule with one radio and fellow team member Tom Hams using the firm’s QuickDraw2 Interrogator inside the C-17 aircraft, the two were able to communicate as part of simulated rescue efforts over a distance of 90 nautical miles.

Using the HOOK3 radio, the rescuers and capsule crew quickly communicated to ensure the raft had all the emergency gear necessary before the Air Force pararescue jumpers parachuted from the C-17 to stabilize the capsule and wait for rescue. Following the simulated rescue, Wootten said: “This is why it is so important to equip the C-17 with combat search and rescue gear, which hopefully never has to be used. Before this, the C-17 was not a rescue aircraft.”

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.