VCO Tunes From 3901 To 4101 MHz

Oct. 23, 2008
The model CVCO55CC-3901-4101 voltage-controlled oscillator (VCO) from Crystek Corp. is suitable for use in applications such as digital radio equipment, fixed wireless access, satellite communications systems, and base stations. It tunes from 3901 to ...

The model CVCO55CC-3901-4101 voltage-controlled oscillator (VCO) from Crystek Corp. is suitable for use in applications such as digital radio equipment, fixed wireless access, satellite communications systems, and base stations. It tunes from 3901 to 4101 MHz by means of a voltage control range of approximately 0.1 to 16.0 V. It has typical phase noise of -104 dBc/Hz offset 10 kHz from the carrier with +5 dBm typical output power and -20 dBc typical second harmonics. The VCO, which draws maximum current of 40 mA at +8 VDC, is housed in a 0.5 x 0.5 in. surface-mount package.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...