VCO Features -106 dBc/Hz Phase Noise At 10 kHz Offset

Jan. 29, 2009
The latest voltage-controlled oscillator (VCO) from Crystek Corp. operates from 2745 to 2860 MHz with a control voltage range of 0.5 to 4.5 V. Dubbed the CVCO55CC-2745-2860, this VCO features typical phase noise of -106 dBc/Hz at 10 kHz offset from the ...

The latest voltage-controlled oscillator (VCO) from Crystek Corp. operates from 2745 to 2860 MHz with a control voltage range of 0.5 to 4.5 V. Dubbed the CVCO55CC-2745-2860, this VCO features typical phase noise of -106 dBc/Hz at 10 kHz offset from the carrier. Output power is typically +4 dBm. The VCO consumes 35 mA maximum current from a +5-VDC supply. Pulling and pushing are minimized to 0.8 MHz and 1.3 MHz/V, respectively. Second harmonic suppression is typically -15 dBc. The model CVCO55CC-2745-2860 is packaged in the industry-standard 0.5-in. x 0.5-in. SMD package.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...