Two-Way Power Divider Channels 2 To 8 GHz

Sept. 9, 2009
Coupler specialist Krytar recently announced the development of its model 6020080 Wilkinson two-way power divider for applications from 2 to 8 GHz. The power divider exhibits maximum VSWR of 1.45:1 at any port with less than 0.8-dB insertion loss. The ...

Coupler specialist Krytar recently announced the development of its model 6020080 Wilkinson two-way power divider for applications from 2 to 8 GHz. The power divider exhibits maximum VSWR of 1.45:1 at any port with less than 0.8-dB insertion loss. The port-to-port isolation is 19.5 dB. The broadband power divider features amplitude tracking between ports that is within 0.25 dB and phase tracking that is within 5 deg. The two-way power divider, which can be manufactured to meet military requirements, is supplied with SMA female connectors.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...