People

Feb. 16, 2012
ARMike Alferman has been appointed Regional Sales Manager for the Pacific Rim. Alferman previously held positions at EPCOS/Siemens, Andersen Laboratories, IWPC, Eastman Kodak, and Loral. In addition, the company has added three engineers in its ...

ARMike Alferman has been appointed Regional Sales Manager for the Pacific Rim. Alferman previously held positions at EPCOS/Siemens, Andersen Laboratories, IWPC, Eastman Kodak, and Loral. In addition, the company has added three engineers in its Souderton, PA headquarters. Anthony Peroni previously served as a Design Engineer at Motorola, M/A-COM, and Spectrum Microwave. Dave Bains formerly worked for Microwave Semiconductor Corp., Amplidyne, and Witron in the same role. Finally, Keith Miller comes to AR with more than 35 years of experience as a Design Engineer.
MTN Satellite CommunicationsThe board of directors has appointed Errol Olivier to the role of President and Chief Executive Officer. Olivier most recently served as the company's President and Chief Operating Officer.
DEV SystemtechnikStefan Philipps has been appointed Area Sales Manager for Germany, Austria, and Switzerland. Philipps has extensive experience as
a Consultant, Sales Representative, and Product Manager in computer and networking technology.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.