Four-Way Divider Runs 8000 To 2500 MHz

July 14, 2010
Model AM1650PD873 is a four-way power divider from Anatech Electronics designed for applications from 800 to 2500 MHz. It can handle 300 W CW input power over that range, with less than 6.3 dB insertion loss. The isolation between ports is at least 17 dB ...

Model AM1650PD873 is a four-way power divider from Anatech Electronics designed for applications from 800 to 2500 MHz. It can handle 300 W CW input power over that range, with less than 6.3 dB insertion loss. The isolation between ports is at least 17 dB while the input and output VSWR is less than 1.25:1. The 50-Ohm divider is supplied with SMA female connectors and measures 1.25 x 1.25 x 0.75 in. It is rated for operating temperatures from -30 to +60 deg. C.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...