Chip Resistors Handle High Temperatures

July 28, 2010
The PHT series of surface-mount wraparound thin-film chip resistors from Vishay Intertechnology is well suited for high-temperature environments, including aerospace and down-hole-drilling systems. They can handle temperatures from -55 to +215C and ...

The PHT series of surface-mount wraparound thin-film chip resistors from Vishay Intertechnology is well suited for high-temperature environments, including aerospace and down-hole-drilling systems. They can handle temperatures from -55 to +215C and feature power ratings from 12.5 to 100 mW. The resistors, which have a 0.5-mm height profile, are available in 0603, 0805, 1206, and 2010 case sizes. They can be supplied with values from 10 Ohms to 7.6 MOhms, depending upon case size. They feature a load life stability of 0.5 percent after 1000 hours at +215C, with typical temperature coefficient of resistance (TCR) of 25 PPM/C.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...