Mwrf 11093 Fractal Tv Antenna
Mwrf 11093 Fractal Tv Antenna
Mwrf 11093 Fractal Tv Antenna
Mwrf 11093 Fractal Tv Antenna
Mwrf 11093 Fractal Tv Antenna

Tree Shape Helps Trim Size of Fractal Antenna

June 21, 2019
A fractal antenna shaped as a tree trims the amount of conductive metal required on PCB material compared to conventional patch antennas.

Antennas are important components in many systems, although they often add considerable size and weight. In their efforts to shrink the size and weight of RF/microwave antennas for spaceborne applications and wearable electronic devices, researchers from the University of Texas at Austin and Texas State University developed a miniaturized, tree-shaped fractal antenna (FA) on a flexible circuit material. It’s approximately one-half the size of a standard rectangular patch antenna designed for the same frequencies.

The antenna is fabricated on commercial, flexible circuit substrate material using conductive metal (silver) ink and a material inkjet printer capable of producing repeatable features as fine as 20 μm. The V-shaped branches of the antenna’s tree structure, which are unit cells with very repetitive behavior, do not require much space on the substrate material. The antenna is fed by a 50-Ω coplanar-waveguide (CPW) transmission-line section with filleted grounds to reduce the size of the antenna’s metal footprint and increase the antenna’s bandwidth by providing in-phase reflections from ground at more frequencies. Impedance matching to the antenna is performed by a tapered CPW transmission line.

Various iterations of the antenna were simulated, fabricated, and measured with commercial simulation software and test equipment. This was done to better understand the effects of dimensional changes on frequency and how the number of branches in a printed tree structure would impact the assorted frequencies and performance levels of the antennas. Many different resonant frequencies and bandwidths were studied, including a bandwidth of 2.83 GHz at 16 GHz and a bandwidth of 2.05 GHz at 7.71 GHz.

Most antenna configurations resulted in respectable gain at the resonant frequency. In all cases, the tree-shaped FAs were fabricated with significant reduction in metal ink compared to standard rectangular patch antennas, with much smaller metal footprints and smaller antenna sizes. Thus, these antennas make strong candidates for wearable electronic devices throughout the RF/microwave frequency range. 

See “A Miniaturized Tree-Shaped Fractal Antenna Printed on a Flexible Substrate,” IEEE Antennas and Propagation Magazine, June 2019, pp. 60-66.

Sponsored Recommendations

Microelectromechanical 3D Printing Resources

March 28, 2024
Check out our curated list of microelectromechanical 3D printing resources and see how PµSL technology offers freedom and speed.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Making the Case for Micro-Precision 3D Printing

March 28, 2024
Read this white paper to learn how micro-precision 3D printing can provide the flexibility of additive manufacturing at a micro scale.

125 GHz Frequency Doubler using a Waveguide Cavity Produced by Stereolithography

March 28, 2024
Read this technical paper to learn how a 125 GHz frequency doubler using a waveguide cavity was produced by stereolithography.