Mwrf 10346 0319 05c 2
Mwrf 10346 0319 05c 2
Mwrf 10346 0319 05c 2
Mwrf 10346 0319 05c 2
Mwrf 10346 0319 05c 2

Improving WiMAX Reception at 3 GHz

Feb. 20, 2019
A simple dielectric resonator antenna design provides improved WiMAX performance in the 3-GHz band.

As the popularity of wireless communications systems, such as WiMAX, continues to grow worldwide, antenna designers are faced with making components that are smaller but provide better reception than their older, larger predecessors. In quest of such a next-generation WiMAX antenna, Rajkishor Kumar, Sreenath Reddy Thummaluru, and Raghvendra Kumar Chaudhary from the Indian Institute of Technology in Dhanbad, India developed a dielectric resonator antenna (DRA) using a stair-shaped microstrip feed line, a rectangular dielectric resonator (DR), and a pair of L-shaped slots in the ground plane. The feed line enables the antenna to achieve wideband frequency coverage (2.94 to 3.85 GHz) with a circularly polarized (CP) radiation pattern.

The researchers followed a regimented, five-step design procedure to create the antenna. Slots in the ground plane were introduced as all antenna design parameters were kept constant by making modifications in the microstrip feed lines with the changes in the ground plane. In quest of a wide impedance bandwidth, several antenna designs were implemented until the target impedance bandwidth was achieved, modeling the amount of coupling between the DR and microstrip lines. Adding the L-shaped slot in the ground plane impacts the surface current density of the antenna design—parameters such as the height of the L-shaped slot affect the resonance mode on CP and the antenna’s ultimate frequency range.

While the mechanical adjustments made to this DRA may initially seem elaborate, the fabricated antenna design is less complex than many standard WiMAX antennas that were used for reference comparison. The new design provides a usable bandwidth of better than 17% at the center frequency with a single DR compared to other rectangular and comb-shaped antennas with more than one resonator, far less bandwidth, and very complex implementation. It’s also considerably smaller than the comparable WiMAX antenna designs, with better far-field parameters than the other reference antennas, for much improved WiMAX reception at greater distances.

See “Improvements in Wi-Max Reception,” IEEE Antennas & Propagation Magazine, Vol. 61, No. 1, February 2019, pp. 41-49.

Sponsored Recommendations

Making the Case for Micro-Precision 3D Printing

March 28, 2024
Read this white paper to learn how micro-precision 3D printing can provide the flexibility of additive manufacturing at a micro scale.

125 GHz Frequency Doubler using a Waveguide Cavity Produced by Stereolithography

March 28, 2024
Read this technical paper to learn how a 125 GHz frequency doubler using a waveguide cavity was produced by stereolithography.

Micro 3D Printing: Enabling Miniaturization

March 28, 2024
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

3D Printing Material Advancements

March 28, 2024
Learn more about 3D printing material advancements and current trends from our material expert, Carl Leonard, our UK application engineer.