Compact Monopole And Dipole Antennas Reach 916 MHz

March 30, 2010
The HW series of half-wave, center-fed dipole and quarter- wave monopole antennas is now available with standard SMA connector terminations. These antennas feature internal counterpoises. They are available in standard center frequencies of 315, ...

The HW series of half-wave, center-fed dipole and quarter- wave monopole antennas is now available with standard SMA connector terminations. These antennas feature internal counterpoises. They are available in standard center frequencies of 315, 418, 433, 868, and 916 MHz. The 868- and 916-MHz versions are half-wave center-fed dipoles while the 315-, 418-, and 433-MHz types are all quarter-wave monopoles. They promise to deliver an omni-directional radiation pattern with low VSWR. The rugged antennas attach using an FCC-compliant RP-SMA or standard SMA connector. P&A: $4.98 each in volume quantities.

Antenna Factor, 159 Ort Ln., Merlin, OR 97532; (800) 489-1634, FAX: (541) 471-6251, e-mail: [email protected], Internet: www.antennafactor.com.

See Associated Figure

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.