Mwrf 584 Em 0

Oscillator Locks Onto 1030 MHz

Oct. 8, 2012
Model CLX-1020-XA is a fixed-frequency, phase-locked oscillator with a stable output at 1030 MHz.

Model CLX-1020-XA is a fixed-frequency, phase-locked oscillator with a stable output at 1030 MHz. It includes an internal reference with ±2 ppm stability and delivers +7 dBm output power with ±2-dB output-power flatness. Harmonics are better than -20 dBc while spurious content is better than -80 dBc. The phase noise is better than -97 dBc/Hz offset 1 kHz from the carrier, -109 dBc/Hz offset 10 kHz from the carrier, and -135 dBc/Hz offset 100 kHz from the carrier. The phase-locked oscillator draws less than 85 mA from a +5-VDC supply and has an operating temperature range from -30 to +70°C. It is supplied in a 0.75 x 0.75 in. surface-mount-technology (SMT) package.

EM Research, 1301 Corporate Blvd., Reno, NV 89502; (775) 345-2411, FAX: (775) 345-1030, e-mail: [email protected], www.emresearch.com.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.