Mwrf 1508 Crystek 0
Mwrf 1508 Crystek 0
Mwrf 1508 Crystek 0
Mwrf 1508 Crystek 0
Mwrf 1508 Crystek 0

Low-Noise VCO Tunes 1 to 2 GHz

July 25, 2014
This compact voltage-controlled oscillator (VCO) covers 1 to 2 GHz with low noise and high linearity.

Model CVCO55BE-1000-2000 is a voltage-controlled oscillator (VCO) with tuning range from 1000 to 2000 MHz. It tunes via control voltages from +1 to +20 VDC and provides typical output power of +5.5 dBm across the frequency range. The source achieves low single-sideband phase noise of typically -95 dBc/Hz offset 10 kHz from the carrier, with second-harmonic suppression of typically -10 dBc. Housed in an industry-standard 0.5 × 0.5 in. SMD package, the VCO minimizes pulling and pushing to 7.5 MHz and 2.5 MHz/V, respectively. The low-noise oscillator, which consumes typically 25 mA current from a +10-VDC supply, is designed for operating temperatures from -40 to +80°C.

Crystek Corp., 12730 Commonwealth Dr., Fort Myers, FL 33913; (800) 237-3061, (239) 561-3311, FAX: (239) 561-1025

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...