Thinkstock
Mwrf 7659 5g 623431736 0
Mwrf 7659 5g 623431736 0
Mwrf 7659 5g 623431736 0
Mwrf 7659 5g 623431736 0
Mwrf 7659 5g 623431736 0

A 5G World Requires Suitable MIMO Testing

Dec. 8, 2017
This technical brief explains 5G MIMO networks as well as potential test solutions that can be utilized.

Next-generation 5G networks are expected to represent a revolutionary change in wireless communications. Furthermore, multiple-input, multiple-output (MIMO) technology is primed to play an important role in these networks. Test systems must therefore account for this key technology. In the new technical brief, “Insights on Evolving 5G MIMO Networks and Test Methods,” Vaunix Technology describes various MIMO implementations before discussing possible test solutions for these systems.

The technical brief begins by noting that the number of devices connected to the internet will exceed 20 billion in 2020, according to some predictions. Another point mentioned is how mobile phones are increasingly being used to connect to the internet. These points help to illustrate the need for better network performance, which is what 5G is expected to provide. These performance improvements include faster data rates, enhanced spectral efficiency, and lower latency.

MIMO technology is expected to be utilized to overcome the challenges associated with 5G. The document examines MIMO by first discussing small cells, with an explanation of hardwired and mesh-network small cells. Millimeter-wave and massive MIMO are also discussed. The latter allows for a significant increase in spectral efficiency, which is a major requirement of 5G.

Linear processing and precoding are the next topics. According to the document, the preferred method for linear processing involves time-division-duplex (TDD) systems that leverage channel reciprocity, which is a property that allows channel state estimation (CSI) to be estimated at the transmitter. Furthermore, precoding techniques represent another challenge for engineers involved with 5G system development.

MIMO test solutions are then discussed. MIMO testing often requires digital attenuation and RF switching functionality. The document points out the benefit of utilizing USB-powered portable test equipment to meet MIMO test challenges. It also points out that vendors should offer products with a variety of frequency ranges and performance levels. Other factors mentioned are graphical-user-interfaces (GUIs) that are easy to use and install, as well as the capability to operate multiple devices directly from a PC or self-powered USB hub.

Vaunix Technology Corporation, 7 New Pasture Rd., Newburyport, MA 01950; (978) 662-7839

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...