Mwrf 758 Rs 0
Mwrf 758 Rs 0
Mwrf 758 Rs 0
Mwrf 758 Rs 0
Mwrf 758 Rs 0

Amplifiers Aid EMC Measurements

March 14, 2013
A new series of high-power amplifiers for EMC testing includes models operating from 0.8 to 3.0 GHz with output levels from 30 to 200 W.

Compact amplifiers in the R&S BBA150 amplifier family support electromagnetic-compatibility (EMC) testing through 3 GHz, as well as for non-EMC applications in component production and quality assurance. The modular amplifiers can be operated manually via their front-panel displays, or else remotely via external computer and software. The first model in the series operates from 0.8 to 3.0 GHz and is available with power levels ranging from 30 to 200 W output power. The 200-W version occupies only four height units in a standard 19-in. rack.

Rohde & Schwarz USA, Inc., 8661A Robert Fulton Dr., Columbia, MD 21046-2265; (410) 910-7800, FAX: (410) 910-7801; e-mail: [email protected], www.rohde-schwarz.com.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...