Mwrf 1287 Timesmicrowave 0

Connectors Link Low-PIM Cables

April 28, 2014
Cable/connector assemblies offer excellent PIM performance through 6 GHz.

Suitable for in-building applications requiring low passive-intermodulation (PIM) levels, the new 4.1/9.5 mini-DIN straight male connector model TC-SPP250-4195M-LP is available for termination of the low-loss SPP-250-LLPL 50-Ω cables from Times Microwave Systems. These cables, which support in-building applications and interconnections to 6 GHz, feature a 0.25-in. superflexible-type corrugated cable with low-density polytetrafluoroethylene (PTFE) dielectric and fluorinated ethylene propylene (FEP) jacket that meets UL910 requirements for plenum applications. The cable assembles offer PIM performance of better than -155 dBm.

Times Microwave Systems, 358 Hall Ave., Wallingford, CT 06492; (203) 949-8400, FAX: (203) 949-8423

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...