Signal Source Fixes On 4 GHz

Nov. 21, 2012
A phase-locked frequency synthesizer provides stable 4-GHz signals for satcom applications when working with a 10-MHz reference source.

Model SFS4000C-LF is a RoHS-compliant frequency synthesizer for satellite-communications (satcom) and test applications. The fixed-frequency unit is phase locked at 4 GHz using a 10-MHz reference oscillator. The coaxial synthesizer delivers 0-dBm output power and exhibits phase noise of typically -102 dBc/Hz offset 10 kHz from the carrier with typical spurious content of -65 dBc. Second-harmonic levels are typically -15 dBc. The frequency source, which is supplied in a PLL-V12C package measuring 0.60 in. x 0.60 in. x 0.22 in., consists of a voltage-controlled oscillator (VCO) with power consumption of 30 mA at +5 VDC, as well as a phase-lock-loop (PLL) chip with power consumption of 11 mA at +3.3 VDC. It is designed for operating temperatures from -25 to +90°C.

Z-Communications, Inc., 14118 Stowe Dr., Ste. B,Poway, CA 92064; (858) 621-2700, (877) 808-1226, FAX: (858) 486-1927, e-mail: [email protected], www.zcomm.com.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.