Mwrf 9278 0818 43k Promo
Mwrf 9278 0818 43k Promo
Mwrf 9278 0818 43k Promo
Mwrf 9278 0818 43k Promo
Mwrf 9278 0818 43k Promo

5G Front-End Reference Design Meets Multiple Needs

July 13, 2018
Integrating a power amplifier, a pre-driver amplifier, and a receiver switch/low-noise amplifier, this flexible front-end solution is equipped for next-generation 5G communications.

Without question, 5G communications was a central theme at IMS 2018. One standout 5G-based product at the show was NXP Semiconductors’ new RF front-end reference design for 5G massive multiple-input, multiple-output (MIMO) systems (see figure). This front-end solution supports frequencies ranging from 2.3 to 5.0 GHz. Furthermore, it integrates a combination of silicon-germanium (SiGe), gallium-arsenide (GaAs), and laterally diffused metal-oxide semiconductor (LDMOS) technologies.

The functionality of the front-end solution is the product of three main components. One is an LDMOS Doherty power amplifier module (PAM). NXP offers different PAM variants that are all footprint-/pin-compatible, meaning any PAM version can be mounted onto the reference design board.

The second component is a low-power Doherty pre-driver amplifier module. Like the PAMs, NXP offers different footprint-/pin-compatible pre-driver amplifier versions, so that each one be incorporated into the reference design. The third component is a receiver front-end module, which is comprised of a transmit/receive (T/R) switch and low-noise amplifier (LNA).

This new RF front-end reference design for 5G massive-MIMO systems supports frequencies from 2.3 to 5.0 GHz.

With the footprint-/pin-compatible PAMs and pre-driver amplifiers, customers can essentially “plug-and-play” among different frequencies and power levels, as the same board design can accommodate different component versions. The PAM versions each cover various frequencies and power levels, while the pre-driver amplifier versions handle different frequency bands. Moreover, the front-end solution requires fewer components on a printed-circuit board (PCB), which reduces total system costs. NXP also notes that a significant benefit of the design is its small size—the front-end assembly measures about 21 × 35 mm.

The PAMs, which are based on LDMOS technology, come in packages that measures 6 × 10 mm. Their output power level ranges from 2.5 to 5 W. In addition, the input and output of the components are both matched to 50 Ω.

The pre-driver amplifiers, offering 32 dB of gain, are housed in a 3- × 4-mm package. The amplifiers achieve a 1-dB compression (P1dB) of either +25 or +29 dBm, depending on the supply voltage (the amplifiers require either +3.3 or +5 V; Id is 50 mA). Like the PAMs, the input and output of the pre-driver amplifiers are matched to 50 Ω.

Lastly, as mentioned, the receiver front-end module comprises a T/R switch and LNA. It comes in a 4- × 4-mm package. Covering the full frequency range of 2.3 to 5.0 GHz, the receiver front-end module provides about 33 dB of gain while achieving a noise figure of less than 1.2 dB. Its switching speed is 0.8 µs. Operating from a 5-V supply, the component’s current consumption is 100 mA. Like the PAMs and pre-driver amplifiers, the input and output of the receiver front-end module are both matched to 50 Ω.

Sponsored Recommendations

Microelectromechanical 3D Printing Resources

March 28, 2024
Check out our curated list of microelectromechanical 3D printing resources and see how PµSL technology offers freedom and speed.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Making the Case for Micro-Precision 3D Printing

March 28, 2024
Read this white paper to learn how micro-precision 3D printing can provide the flexibility of additive manufacturing at a micro scale.

125 GHz Frequency Doubler using a Waveguide Cavity Produced by Stereolithography

March 28, 2024
Read this technical paper to learn how a 125 GHz frequency doubler using a waveguide cavity was produced by stereolithography.