Mwrf 9120 Atoa Blog8 Promo
Mwrf 9120 Atoa Blog8 Promo
Mwrf 9120 Atoa Blog8 Promo
Mwrf 9120 Atoa Blog8 Promo
Mwrf 9120 Atoa Blog8 Promo

Algorithms to Antenna: Reducing Signal Distortions—PA Characterization with DPD

June 20, 2018
This latest blog post in the series presents a workflow that can be utilized for nonlinear power-amplifier (PA) characterization.

I am excited this month to share a new workflow that I think will be useful in your wireless system design. The workflow provides a methodology you can use to characterize a nonlinear power amplifier (PA). It also connects this characterization to an adaptive digital pre-distortion (DPD) feedback system with an overall goal of reducing the effects of output signal distortion of an RF transmitter.

I like this workflow because you can use MATLAB to create a model for an RF PA. The coefficients of the model are extracted by fitting the actual measured data for the PA. After deriving the set of coefficients for the PA model with functions that operate on the measured data, you can use the model as part of a system-level simulation to see how performance changes with DPD.

To accomplish this, we provide an adaptive DPD algorithm that can be enabled during simulation. It’s able to help you evaluate and understand how the linearity of the RF transmitter system output signal improves after enabling DPD correction.

1. This figure illustrates the PA characterization.

Figure 1 shows the input and output complex measured I/Q signals of the PA that we started with. This commercially available PA was characterized in the lab using a standard-compliant LTE signal.

The top plot of Figure 2 shows the magnitude characteristic of the PA—the absolute value of the output gain versus input signals. Note that scattering around a straight line representing the gain results from memory effects (curve dispersion). The bending of the data curve for large input-signal values results from the PA nonlinearity (deviation from straight horizontal line).

2. Shown is the magnitude characteristic of the PA (top) and power gain transfer function of the PA (bottom).

With this data, we have multiple ways to determine the complex coefficients for the amplifier model. The bottom plot of Fig. 2 shows the resulting power gain transfer function for one technique using a generalized memory polynomial approach.

Once we have our coefficients, we can load them directly into our PA model, shown in Figure 3 as part of a system-level simulation.

3. This figure depicts a system-level model for 16-QAM waveform.

In Figure 4 (top), we can see that with DPD disabled, the average modulation error rate (MER) is about 15 dB.

4. A receive constellation for 16-QAM system is shown.

With DPD enabled, the average MER improves to 28 dB (Fig. 5).

5. Here’s a receive constellation for 16-QAM system with DPD enabled.

You can also implement the DPD algorithm on an FPGA or a microcontroller for rapid prototyping. With this approach, you can use the same testbench to test and implement your algorithm. I will talk more about this in a future blog.

Everything I have described quickly here is explained in more detail in the Power Amplifier Characterization with DPD for Reduced Signal Distortion example. In the full example, you can see a range of techniques to generate the coefficients. You can also see more info on the system-level model to see how DPD can be used to reduce the effect of the PA’s nonlinearities.

Have more questions? Email me at [email protected]

Learn more about the topics covered in this blog post:

See additional 5G, radar, and EW resources, including those referenced in previous blog posts.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...