Diplexer Screens CATV Systems

March 14, 2013
A miniature, surface-mount diplexer filter is designed for CATV applications through 1 GHz.

Model MAFL-011013 is a 75-Ω broadband diplexer filter for cable-television (CATV) applications, direct-broadcast-satellite (DBS), and cable-modem applications. It is usable over the frequency bands of 5 to 42 MHz and 54 to 1000 MHz, with typical insertion loss of only 0.5 dB in either frequency band. Signal isolation is typically 55 dB from 5 to 37 MHz; 50 dB from 54 to 100 MHz; 55 dB from 100 to 600 MHz; and 50 dB from 600 to 1000 MHz. Return loss is typically 16 dB across its full frequency range of operation. The diplexer, which is rated for maximum RF power of 250 mW and DC current of 30 mA, has an operating temperature range of -40 to +85°C. The RoHS-compliant component, which is supplied in an 11-pin surface-mount package, is available in tape-and-reel format for high-volume-production applications.

M/A-COM Technology Solutions, Inc., 100 Chelmsford St., Lowell, MA 01851; (800) 366-2266, (978) 656-2500, www.macomtech.com.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.