Berkeley Nucleonics
Mwrf 6633 Berkeley Promo 0
Mwrf 6633 Berkeley Promo 0
Mwrf 6633 Berkeley Promo 0
Mwrf 6633 Berkeley Promo 0
Mwrf 6633 Berkeley Promo 0

Phase-Noise Tester Analyzes Noise Affordably

Sept. 14, 2017
A relatively affordable test system performs phase-noise measurements on microwave sources from 5 MHz to 40 GHz in three system configurations.

Growing awareness of the importance of phase noise in communications and radar systems has created a similarly growing interest in the means of measuring phase noise. Berkeley Nucleonics Corp. made some noise of its own at EDI CON 2017 with its affordable phase-noise measurement solutions (see photo), with versions available for absolute and residual phase-noise measurements at carriers from 5 MHz to 7, 26, or 40 GHz. Featuring noise floors to −188 dBc/Hz (offset 10 MHz from the carrier), the 7000 Series signal source analyzer and dedicated phase noise test systems can measure phase noise at offset frequencies from 0.01 Hz to 100 MHz.

The test systems can perform amplitude-modulated (AM) and pulsed phase-noise measurements on many types of oscillators and frequency synthesizers, using its own internal reference oscillator or an external frequency reference. In addition to its phase-noise measurement capabilities, the tester can perform spectrum analysis, frequency counting, and even transient measurements, such as frequency, phase, and amplitude versus time.

The 7000 series phase-noise testers include two programmable low-noise DC supplies for powering an oscillator or synthesizer under test and three low-noise tuning voltages for tuning voltages from −5 to +22 V dc. It provides a number of control interfaces for automatic-test-equipment (ATE) applications, and can handle input power levels of −15 to +17 dBm from 5 MHz to 2 GHz, −12 to +20 dBm from 2 to 9 GHz, −10 to +20 dBm from 9 to 18 GHz, −13 to +20 dBm from 18 to 30 GHz, and 0 to +23 dBm from 30 to 40 GHz.

The measurement accuracy is better than ±4 dB for offset frequencies of less than or equal to 1 kHz and ±2 dB for offset frequencies greater than 1 kHz. Most visitors to Berkeley Nucleonics’ EDI CON exhibition booth were pleasantly pleased by the relatively low price for such a system.

Sponsored Recommendations

Microelectromechanical 3D Printing Resources

March 28, 2024
Check out our curated list of microelectromechanical 3D printing resources and see how PµSL technology offers freedom and speed.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Making the Case for Micro-Precision 3D Printing

March 28, 2024
Read this white paper to learn how micro-precision 3D printing can provide the flexibility of additive manufacturing at a micro scale.

125 GHz Frequency Doubler using a Waveguide Cavity Produced by Stereolithography

March 28, 2024
Read this technical paper to learn how a 125 GHz frequency doubler using a waveguide cavity was produced by stereolithography.