Mwrf 1251 Comtech P 0
Mwrf 1251 Comtech P 0
Mwrf 1251 Comtech P 0
Mwrf 1251 Comtech P 0
Mwrf 1251 Comtech P 0

Amplifier Powers 50 W to 6 GHz

April 4, 2014
Amplifier Powers 50 W to 6 GHz
Model BME2969-50 is a solid-state, Class AB amplifier based on gallium-nitride (GaN) active-device technology. It delivers 50-W output power from 2 to 6 GHz with 54-dB gain and ±3-dB gain flatness. Harmonics are held to –13 dBc. The amplifier runs on bias of 18 to 36 Vdc. It is screened for use to altitudes to 30,000 feet and for shock and vibration per MIL-STD-810F. Options include an RS-232 interface, RF detectors, and an integrated transmit/receive (T/R) switch. It measures 7.5 × 3.0 × 1.5 in. excluding connectors and weighs 3 lb.

Comtech PST, 105 Baylis Rd., Melville, NY 11747, (631) 777-8900, FAX: (631) 777-8877, www.comtechpst.com

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...