Waveguide Switches Control 7.05 To 40 GHz

Dec. 17, 2009
A full range of waveguide switches for applications from 7.05 to 40.00 GHz is available in standard waveguide sizes from RLC Electronics. Supplied in both single-pole/double-throw (SPDT) and double-pole/double-throw (DPDT) configurations, the compact ...

A full range of waveguide switches for applications from 7.05 to 40.00 GHz is available in standard waveguide sizes from RLC Electronics. Supplied in both single-pole/double-throw (SPDT) and double-pole/double-throw (DPDT) configurations, the compact waveguide switches employ a proprietary non-contacting actuator mechanism that requires low current. The switches can be specified with a variety of options, including a choice of coil voltages ranging from 5 to 28 V, frequency ranges of 7.05 to 40 GHz in standard waveguide sizes, operating modes of failsafe, latching, manual override, and manual operating modes, TTL drivers, and function indicators. All designs conform to the requirements of MIL-DTL-3928 and offer low insertion loss, high isolation and low VSWR, with switching times as fast as 25 ms.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...