VCO Tunes From 960 To 1080 MHz

Nov. 11, 2010
Designed to tune from 960 to 1080 MHz with tuning voltages of 0.5 to 4.5 V, model CLV1020A-LF is a voltage-controlled oscillator (VCO) from Z-Communications with linear tuning characteristics and low phase noise. The oscillator features phase noise of ...

Designed to tune from 960 to 1080 MHz with tuning voltages of 0.5 to 4.5 V, model CLV1020A-LF is a voltage-controlled oscillator (VCO) from Z-Communications with linear tuning characteristics and low phase noise. The oscillator features phase noise of typically +106 dBc/Hz offset 10 kHz from the carrier with typical tuning sensitivity of 40 MHz/V. It delivers +2 dBm output power at 20 mA and +5 VDC and exhibits typical second harmonics of -15 dBc. The RoHS-compliant source is supplied in the firm's standard MINI-14S package measuring 0.5 in. x 0.5 in. x 0.22 in. Model CLV1020A-LF is well suited for satellite communication and fixed wireless applications.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...