VCO Tunes From 2435 To 2485 MHz

May 20, 2010
Model ZRO2460B1LF is a surface-mount voltage-controlled oscillator (VCO) from Z-Communications that provides low-noise operation from 2435 to 2485 MHz. It tunes across the frequency range with control voltage of 1 to 10 V, with typical phase noise of ...

Model ZRO2460B1LF is a surface-mount voltage-controlled oscillator (VCO) from Z-Communications that provides low-noise operation from 2435 to 2485 MHz. It tunes across the frequency range with control voltage of 1 to 10 V, with typical phase noise of -113 dBc/Hz offset 10 kHz from the carrier. The average tuning sensitivity is 8 MHz/V. Ideally suited for microwave backhaul radio applications, the VCO delivers +6 dBm typical output power into a 50-Ohm load and draws only 30 mA from a +8-VDC supply. Frequency pushing is less than 0.7 MHz/V with a 5-percent change in supply voltage and pulling is less than 0.7 MHz with a 14-dB return loss, any phase. It is supplied in a MINI-16-SM surface-mount package measuring 0.50 in. x 0.50 in. x 0.22 in. and is available in tape and reel packaging for production requirements.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...