Ruggedized Units Attenuate From 1 To 20 dB

Feb. 26, 2009
A new line of attenuators is designed in a rugged SMA housing for easy in-line connection and operation in test equipment, RF laboratory use, and other embedded applications. Dubbed the CATTEN models, these attenuators range from 1 to 20 dB signal ...

A new line of attenuators is designed in a rugged SMA housing for easy in-line connection and operation in test equipment, RF laboratory use, and other embedded applications. Dubbed the CATTEN models, these attenuators range from 1 to 20 dB signal attenuation. The 50-Ohm units span DC to 3 GHz. They provide 1 W of power dissipation (0.5 W for the 15- and 20-dB models). Tolerance matching is used to provide superior temperature tracking to individual components. The attenuator's operating temperature range is -40 to +85 degrees C. P&A: stock; approximately $18 each.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...