Power Divider Splits 1 To 500 MHz

Nov. 11, 2010
Model AM250PD1010 is a two-way power divider from Anatech Electronics with less than 0.8 dB insertion loss from 1 to 500 MHz. It offers at least 25 dB isolation between ports with input VSWR of better than 1.20:1 and output VSWR of better than 1.30:1. ...

Model AM250PD1010 is a two-way power divider from Anatech Electronics with less than 0.8 dB insertion loss from 1 to 500 MHz. It offers at least 25 dB isolation between ports with input VSWR of better than 1.20:1 and output VSWR of better than 1.30:1. The amplitude balance is 0.3 dB and the phase balance is 2 deg. The 50-Ohm divider can handle input power to 1 W. It measures 1.25 x 1.25 x 0.75 in. and can be supplied with SMA, BNC, TNC, F, or Type-N female connectors.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...