Mixer Translates 500 To 8000 MHz

Feb. 4, 2010
Model TBR0058LA3 is a wideband triple-balanced mixer from MITEQ with an RF and local oscillator (LO) frequency range of 500 to 8000 MHz and an intermediate-frequency (IF) range of 50 to 3000 MHz. Suited for both commercial and military applications, the ...

Model TBR0058LA3 is a wideband triple-balanced mixer from MITEQ with an RF and local oscillator (LO) frequency range of 500 to 8000 MHz and an intermediate-frequency (IF) range of 50 to 3000 MHz. Suited for both commercial and military applications, the mixer features a dual-quad-diode circuit with 12.5 dB typical conversion loss and typical single-sideband noise figure of 11.5 dB. It exhibits typical LO-to-RF isolation of 25 dB, LO-to-IF isolation of 20 dB, and RF-to-IF isolation of 20 dB. The triple-balanced mixer is rated for +5 dBm input power for 1-dB compression and has a typical input third-order intercept point of +15 dBm. The mixer, which is supplied in a hermetic housing with coaxial connectors, is rated for typical LO drive power of +13 dBm. The typical VSWR is 2.50:1 at all ports. It is available with a variety of options, including higher LO drive levels.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.