Ferrite Isolator Spans 11 To 18 GHz

Feb. 11, 2010
Model 4916 is a broadband ferrite isolator from Narda designed for applications from 11 to 18 GHz. It offers at least 20 dB isolation over that frequency range with maximum insertion loss of 0.5 dB. It can handle peak forward and reverse power levels to ...

Model 4916 is a broadband ferrite isolator from Narda designed for applications from 11 to 18 GHz. It offers at least 20 dB isolation over that frequency range with maximum insertion loss of 0.5 dB. It can handle peak forward and reverse power levels to 20 W and average power of 5 W in the forward direction and 1 W in the reverse direction. The rugged isolator exhibits maximum VSRW of 1.25:1. It operates over a temperature range of -20 degrees to +65 degrees C and measures 0.8 x 0.63 in. with SMA female connectors.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...