Antenna Pulls In 2.45 GHz

Jan. 5, 2011
The PN series of panel-mount antennas from Antenna Factor include model ANT-2.4-PN-SM-01-N for use from 2400 to 2483 MHz. The 50-Ω antenna works with vertical polarization and handles as much as 100 W power using a Type N connector. It provides 16 dBi ...

The PN series of panel-mount antennas from Antenna Factor include model ANT-2.4-PN-SM-01-N for use from 2400 to 2483 MHz. The 50-Ω antenna works with vertical polarization and handles as much as 100 W power using a Type N connector. It provides 16 dBi gain and has a 23-deg. horizontal beamwidth and 23-deg. vertical beamwidth. The VSWR is typically less than or equal to 1.50:1 at the center of the band. It measures 12.01 x 12.01 x 0.79 in. and is fully weatherized for indoor or outdoor applications. It can withstand wind velocities to 75 mph.

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...