Skyworks Flies 4 x 2 Switch Matrix

May 22, 2007
Skyworks Solutions has introduced their model SKY13292-365LF CMOS 4 x 2 switch matrix for applications from 250 to 2150 MHz. Supplies in a 4 x 4 mm QFN surface-mount package, the switch matrix accepts four inputs and provides two outputs, with as many as ...

Skyworks Solutions has introduced their model SKY13292-365LF CMOS 4 x 2 switch matrix for applications from 250 to 2150 MHz. Supplies in a 4 x 4 mm QFN surface-mount package, the switch matrix accepts four inputs and provides two outputs, with as many as 16 different signal states. The typical insertion loss is 7.5 to 9.0 dB across the operating frequency range, with typical isolation of 30 to 40 dB between ports and typically 40 dB at 900 MHz. The matrix achieves 1-dB input compression with +15 dBm typical input power. The switch states can be selected by tone and voltage signals in conjunctiion with logic-level signals applied to the mode-control inputs. The switch draws 8.5 mA typical current from a +5 VDC supply. For more information, visit the Skyworks site at: http://www.skyworksinc.com/

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...