Multi-Mix Makes Millimeter-Wave Filter

July 31, 2007
Merrimac Industries has leveraged its proprietary Mult-Mix(R) multilayer circuit-board technology into the design of a high-performance 42-GHz bandpass filter. Model FBMM-42.0G offers a passband of 3 GHz with typical passband insertion loss of 3.5 dB. ...

Merrimac Industries has leveraged its proprietary Mult-Mix(R) multilayer circuit-board technology into the design of a high-performance 42-GHz bandpass filter. Model FBMM-42.0G offers a passband of 3 GHz with typical passband insertion loss of 3.5 dB. The typical input/output return loss is 15 dB. Rejection is at least 60 dB at 38.5 GHz and at least 30 dB at 46 GHz. The filter, which measures just 0.620 x 0.296 x 0.020 inches and weighs only 0.2 g, can handle input power levels to typically 1 W. For more information on this and a full line of miniature Multi-Mix bandpass filters for RF, microwave, and millimeter-wave applications, visit the Merrimac Industries website at: www.merrimacind.com

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...