Endwave Tunes Low-Noise YIG Sources

Feb. 27, 2007
Endwave Defense Systems has developed a line of YIG-tuned oscillators for applications through 11 GHz. Available in two package configurations, the larger square-packaged mini-YIG oscillators can be specified with buffered output power of typically +14.5 ...

Endwave Defense Systems has developed a line of YIG-tuned oscillators for applications through 11 GHz. Available in two package configurations, the larger square-packaged mini-YIG oscillators can be specified with buffered output power of typically +14.5 dBm across tunable bandwidths as wide as 2 GHz from 3 to 11 GHz. They draw only 100 mA current from an +8.5-VDC supply The smaller, circular-packaged micro-YIG oscillators are lower-cost options that cover bandwidths as wide as 450 MHz from 3 to 10 GHz. They deliver +10 dBm buffered output power while drawin only 70 mA current from an +8.5-VDC supply. For more information, visit the Endwave site at http://www.endwave.com

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...