DROs Generate 3 To 50 GHz

April 29, 2007
Microwave Dynamics offers a stable line of dielectric-resonator oscillators (DROs) for applications from 3 to 50 GHz. Ideal for satellite communications, point-to-point microwave radios, test equipment, and a wide range of military systems, these sources ...

Microwave Dynamics offers a stable line of dielectric-resonator oscillators (DROs) for applications from 3 to 50 GHz. Ideal for satellite communications, point-to-point microwave radios, test equipment, and a wide range of military systems, these sources feature a 100-MHz mechanical tuning range and electrical tuning as an option. They provide +13 dBm output power in standard units, with as much as +25 dBm output power as an option. Output power is flat within 1 dB. Spurious levels are -85 dBc while harmonics are -25 dBc. Phase noise is better than -109 dBc/Hz offset 10 kHz from a 4-GHz carrier and -90 dBc/Hz offset 10 kHz from a 22-GHz carrier. The compact DROs measure just 2.25 x 0.93 x 0.67 inches with female SMA connectors. For more information on these and other oscillators, visit the Microwave Dynamics website at: http://www.microwave-dynamics.com

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.