Compact PLL/Synthesizer Runs At 4240 MHz

Nov. 17, 2009
Essentially, a new phase-locked loop (PLL)/synthesizer combines a voltagecontrolled oscillator (VCO) and a PLL in a package that is only slightly larger than a VCO alone. Dubbed the CPLL58- 4240-4240, this PLL/ synthesizer typically ...

Essentially, a new phase-locked loop (PLL)/synthesizer combines a voltagecontrolled oscillator (VCO) and a PLL in a package that is only slightly larger than a VCO alone. Dubbed the CPLL58- 4240-4240, this PLL/ synthesizer typically offers phase noise of -95 dBc/Hz at 10 kHz offset from the carrier while delivering at least +3 dBm output power. The VCO draws 5 VDC while the PLL requires 3 VDC. The PLL/synthesizer usually provides second harmonic suppression of -15 dBc. It operates at 4240 MHz with typical tuning steps of 2500 kHz. The CPLL58-4240-4240 only requires external frequency reference and supply voltages for the internal PLL and VCO. It is programmed using a standard threeline interface (data, clock, and load enable). The CPLL58-4240-4240 targets telecommunications, computers, radio equipment, base stations, and other electronic applications. It is housed in a 0.582-x-0.8- x-0.15-in. SMD package.

Crystek Corp., 12730 Commonwealth Dr., Ft. Myers, FL 33913; (239) 561-3311, FAX: (239) 561-1025, Internet: www.crystek.com.

See Associated Figure

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.