Chip Resistors Are Optimized For 50-Ohm Impedance

June 13, 2008
BY USING SPECIAL MANUFACTURING techniques to reduce voltage standing wave ratio (VSWR), a family of chip resistors has been optimized for 50-Ω characteristic impedance. Power ratings for the resistors range from 50 mW up to 200 W and a low return ...

BY USING SPECIAL MANUFACTURING techniques to reduce voltage standing wave ratio (VSWR), a family of chip resistors has been optimized for 50-Ω characteristic impedance. Power ratings for the resistors range from 50 mW up to 200 W and a low return loss to 20 GHz. In addition to the standard and MIL-PRF-55342 case sizes, the new components are available in 14 standard case sizes: 0402 thru 3838. The resistors are available with single-surface or wrap-around terminations and a variety of termination materials.

State of the Art, Inc., 2470 Fox Hill Rd., State College, PA 16803-1797; (800) 458-3401, FAX: (814) 355-2714, Internet: www.resistor.com.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...